por Sachin Malhotra y Divya Godayal

Admitamos que todavía estamos atrapados en los matices de cómo escribir un buen algoritmo o tememos el término en sí.Un algoritmo no es nada sofisticado. Es solo el método de hacer algo. Por ejemplo, digamos que Pikachu tiene que visitar a su amigo esta noche. Puede hacerlo de muchas formas diferentes. Lo que importa es el método que elija.

El método que elija determinará el tiempo que le tomará comunicarse con su amigo. Nos ocupamos de estos escenarios a diario. Puede que no pensemos en cada decisión como una decisión algorítmica, pero podría ser una.

Los programadores deben tomar una decisión informada en todo momento. Esto es aún más importante cuando está creando una aplicación altamente escalable y receptiva.

Eres responsable de cada fragmento de código que escribes, incluso si no funciona. ?

### Tabla de contenido ☞

- ¿Por qué analizar un algoritmo? ?
- ¿Complejidad y comportamiento asintótico? ️♀️
- Grados de complejidad ◎ ◉ ● ○ ⦿
- ¿Herramientas para el análisis de la complejidad?
- Complejidad espacial?
- ¿La compensación de tiempo y espacio?
- Ordenamiento de burbuja ?
- Tipo de inserción ???
- Fusionar Ordenar?
- Análisis del árbol de recursividad
- Análisis del método maestro
- Búsqueda binaria ? ? ?

### ¿Por qué analizar un algoritmo? ?

Los algoritmos están en todas partes. Como literalmente, en todas partes. De hecho, para escribir este artículo compilamos una lista de 1200 pasos.

No te lo tomes en serio ahora. ¡Estoy bromeando, por supuesto! ?

Lo que quiero decir es que no hay escape de los algoritmos en ninguna esfera de la vida. ¡Será mejor que aprendas el arte de elegir el correcto!

Digamos que nuestros amados Pokémon organizan un campeonato. Siempre que un pokemon gana una pelea, su rango se actualiza. Para romper los lazos, la próxima pelea es con el Pokémon que comparte la misma puntuación.

Se le pide que cree un sitio web, que es rápido para decir la siguiente coincidencia. El ninja de codificación que hay en ti se emocionó y saltó sobre él. Construiste un sitio web elegante, con gráficos geniales. Inicialmente te dijeron que hay 50 Pokémon que serían parte de la pelea.

Para encontrar el siguiente juego del Pokémon ganador, decidió comparar su puntaje con el puntaje de cada Pokémon en el campeonato, que es esencialmente una búsqueda lineal. ¡Y funcionó como un encanto!

Pero el día del primer partido, se registraron **1000 nuevos** pokemons (¿supongamos?). Aaaah, fastidio. No lo viste venir, ¿verdad?

El análisis asintótico es **la evaluación del rendimiento de un algoritmo en términos de solo el tamaño de entrada (N), donde N es muy grande** . Le da una idea del comportamiento limitante de una aplicación y, por lo tanto, es muy importante medir el rendimiento de su código.

Por ejemplo, si el número de pokemons que participan en la pelea es **N** , entonces la complejidad asintótica de su algoritmo de búsqueda lineal es **O (N)** . Si no sabe qué es esta notación, no se preocupe. Lo abordaremos pronto.

En palabras simples, es como preguntar a todos los pokemons **N** cuál es su rango y luego tomar una decisión. Imagínese preguntar a los 1000 pokemons. ¡Fatigoso! ¿derecho?

Para una máquina, **O (N)** puede no ser malo, pero en un sitio web donde el enfoque es la capacidad de respuesta y la velocidad, puede que no sea la mejor opción.

La razón por la que 1000 nuevos pokemons se convierten en un gran problema es porque no pensaste en el aspecto de escalabilidad de la aplicación desde el principio y usaste un enfoque ingenuo para resolver el problema. Encontrar tales problemas de escalabilidad era solo cuestión de tiempo.

El análisis de algoritmos es así, siempre anda por ahí. Pero solo te lo tomas en serio cuando es realmente necesario. Y luego estás golpeando la cola ... uh oh, me refiero a la maleza.

El análisis de un algoritmo ayuda a medir la eficiencia de su programa y necesita su atención desde el momento en que comienza a pensar en una solución.Podría haber usado un diccionario o una tabla hash para encontrar todos los pokemons con el mismo rango y reducir la complejidad del tiempo algorítmico a **O (1)** . Esto es como ir a un solo administrador de Pokémon que tiene la respuesta a tu consulta.

Una reducción loca en la complejidad del tiempo, de **O (N) a O (1)** . El análisis de un algoritmo permite comparar diferentes enfoques y decidir cuál es el mejor.

### ¿Qué es N, por cierto? ?

N define la entrada. Aquí N es el número de Pokémon. A los efectos del análisis algorítmico, consideramos que N es muy grande.

### ¿Complejidad y comportamiento asintótico? ️♀️

Digamos que Pikachu está buscando un co-pokemon que tenga algún tipo de poder especial. Pikachu comienza preguntando a todos los pokemons sobre sus poderes uno por uno. Este tipo de enfoque se conoce como **búsqueda lineal,** ya que se realiza linealmente, uno por uno. Pero para nuestra referencia, llamémoslo **Búsqueda de Pikachu** .

`1. Pikachu_Search(pokemons): # List of pokemons2. for p in pokemons_list: # No. of iterations - N 3. if p has special power: # Constant time operation4. return p # Constant time operation 5. return "No Pokemon Found" # Constant time operation`

En el fragmento de código anterior, `pokemons_list`

está la lista de todos los Pokémon que participan en el campeonato. Por tanto, el tamaño de esta lista es N.

**Análisis de tiempo de ejecución para la búsqueda de Pikachu:**

`Step 2`

es un bucle for, por lo que las operaciones dentro de él se repetirán N veces.`Step 4`

solo se ejecuta si la condición en el`step 3`

es verdadera. Una vez que`step 4`

se ejecuta, el ciclo se rompe y se devuelve el resultado.- If
`Step 3`

takes a constant amount of time, say`C1`

, then the total time taken in the for loop would be**C1.N.** - All the other operations are constant time operations not affected by the loop so we can take a cumulative constant for all of them as

.**C2**

*Total Runtime f(N) =*

**C1.N + C2**

**,**a function of N.**Let’s make it large. **What if the value of N is very, very large. Do you think the constants would have any significance then?

**In algorithmic analysis, an important idea is to chop off the less important part.**

For example, if the run time for an algorithm is expressed as`10N² + 2N + 5`

then asymptotically, only the higher order term **N² **is of significance. This makes comparison between algorithms much easier.

### Degrees of Complexity ◎◉●○⦿

An algorithm shows different behaviors when exposed to different types of inputs. This brings us to the discussion of how we can define this behavior or the complexity of the algorithm. Since Pikachu’s search is still on, let’s see what’s going on with him.

**Best Case ~***Pure Optimism*. He got very lucky since the very first pokemon he approached had the special power Pikachu was looking for.**Worst Case ~***Pure Pessimism*. He had to go visit all the pokemons and to his dismay, the very last pokemon had the super power which he wanted.**Average Case ~***Being Practical.*Pikachu is a grown up Pokemon now. Experience has taught him a lot and he knows it’s all a matter of time and luck. He estimated high chances of finding the super Pokemon in the first 500 or so Pokemons that he visits and he was right.

Analyzing an algorithm could be done in the above mentioned three ways.

The `best case complexity`

does not yield much. It acts as the lower bound for the complexity of an algorithm. If you go with it, you are just preparing yourself for the best. You have to be pretty lucky for your algorithm to hit the best case bounds anyways. In a practical sense, this doesn’t help much.

Always a good to know, the `average case complexity`

is generally difficult to calculate because it needs you to analyze the performance of your algorithm on different variations of the input and hence not widely used.

`Worst case complexity`

helps you prepare for the worst. In algorithms this kind of pessimism is considered good since it gives an upper bound on the complexity. Hence, you always know the limits of your algorithm!

### Tools for Complexity Analysis ?

We saw earlier that the total runtime for Pikachu’s Search is `f(N)= `

*C1.N + C2*** , **a function of N. Let’s get to know more about the tools we have, to represent the running time, so as to make comparison among algorithms possible.

**Big O **?: Oh yes! It’s pronounced like that. B`ig — Oh `

! It’s the upper bound on the complexity of an algorithm. Hence, it is used to denote the worst behavior of an algorithm.

**Essentially, this denotes the maximum runtime for an algorithm no matter the input.**

It is the most widely used notation because of its ease of analyzing an algorithm by learning about its worst behavior.

For Pikachu’s search, we can say f(N) or running time is bounded from *above *by

for very large N, where is **C.g(N)**`c`

is a constant and `g(N) = N`

. Thus `O(N)`

represents the asymptotic upper bound for Pikachu’s search.

**Big Omega(Ω): **Similar to Big O notation, the Ω notation is used to define an asymptotic lower bound on the performance of an algorithm. Hence, this is used for representing the best case scenarios.

The omega bound essentially means **the minimum amount of time that our algorithm will take to execute**, irrespective of the input.

This notation is not used often in practical scenarios, since studying the best behavior can’t be a correct measure for comparison.

For Pikachu’s search, we can say f(N) or running time is bounded from *below *by

for very large N, where is c is a constant and **C.g(N)**`g(N) = 1`

. Thus

represents the asymptotic lower bound for Pikachu’s Search.**Ω**(1)

**Big Theta**(**Θ)**: A tight bound on the behavior of an algorithm, this notation defines the upper and lower bounds for a function. This is called a `tight bound`

because we fix the running time to within a constant factor above and below. Something like this:

An algorithm might exhibit different best and worst case behaviors. When both are the same, we tend to use the theta notation. Otherwise, the best and worst cases are called out **separately** as:

(a) For

f(N) is bounded by function **worst case**`g(N) = N`

, for large values of N. Hence tight bound complexity would be denoted as`Θ(N)`

. This means the worst case run time for Pikachu’s search is **at least **`C`

and *1⋅N***at most **`C`

*2⋅N.*

(b) Similarly, its

tight bound complexity is **best case**`Θ(1)`

.

Let’s consider one more example where `f(N) = 10N² + 2N + 5`

, for this function the best and worst case complexities would be Ω(N²) and O(N²) respectively. Hence the average or the tight bound complexity would be Θ(N²).

Since worst case complexity acts as a better comparison metric, from now on we will be using Big-O for complexity analysis.

### Space Complexity ?

We have been discussing about time complexity all this while. An important concept in complexity analysis is *Space Complexity*. As the name suggests, it means how much *space or memory* will the algorithm take in terms of N, where N is very large.

Siempre que comparamos diferentes algoritmos para resolver un problema en particular, no solo nos enfocamos en las complejidades del tiempo. La complejidad del espacio también es un aspecto importante para comparar diferentes algoritmos. Sí, es cierto que tenemos mucha memoria disponible en estos días y, por lo tanto, el espacio es algo que puede verse comprometido. Sin embargo, no es algo que debamos ignorar todo el tiempo.

Hay un acertijo interesante que los desarrolladores enfrentan todo el tiempo cuando encuentran soluciones para problemas de programación. Discutamos un poco sobre qué es.

### ¿La compensación de tiempo y espacio?

La mayoría de las veces, desea que su algoritmo sea increíblemente rápido. A veces, al hacerlo, terminas comprometiendo la complejidad del espacio.

Sin embargo, a veces intercambiamos algo de**para optimizar el**

*tiempo***espacio**.

In practical applications, one thing or the other is compromised and this is famously referred to as the time-space tradeoff in the algorithmic analysis world.

Pikachu realized that he was searching for a pokemon every other day. This essentially means running Pikachu’s Search over and over again. Huh ! ? Naturally, he got so tired with the exhausting amount of work he had to put in everyday.

In order to help him out and speed up his search process, we decided to use a hash table. We can use the *power type* of a pokemon as the *key* in the hash table.

If we need to find the pokemons with a special power, the worst case complexity would be `O(1)`

, since hash table lookup is a constant time operation.

Without using this hash table, poor little Pikachu would have had to go visit every pokemon individually and ask about their powers. And repeatedly doing this is insane.

All it took was creating a hash table once and from then on use it for look-ups to bring down the overall runtime!

But that’s not it, as you saw it came with a cost of space. The hash table would need an entry for each Pokemon. Hence the space complexity would be `O(N)`

.

—— *O(N) Time, O(1) Space***Choose between** — — *O(1) Time, O(N) Space*

Esta elección depende de las necesidades de la aplicación. Si tenemos una aplicación orientada al cliente, no debería ser lenta. La prioridad en tal situación sería hacer que la aplicación responda lo más posible sin importar la cantidad de espacio utilizado. Sin embargo, si estamos realmente limitados por el espacio disponible para nosotros, tenemos que renunciar al tiempo para compensarlo.

Elegir sabiamente su algoritmo ayuda a optimizar tanto el tiempo como el espacio.La complejidad del tiempo y el espacio siempre van de la mano. Necesitamos hacer los cálculos e ir con el mejor enfoque. Existe una regla de oro que le ayudará a decidir en cuál ceder. Todo depende de la aplicación.

That’s a lot of theoretical concepts to soak in. We know, even poor Pikachu has gotten a bit bored. But worry not, we will now put all these concepts into some practice and use them to analyze the complexity of some algorithms. This will help clarify the minute differences between the different kinds of complexities, the importance of big-Oh complexity, the time-space tradeoff and more.

To start with, Pikachu wants to analyze all the sorting techniques. Sorting all the Pokemons by their ranks helps him to keep the rank table organized.

Let’s check out the basic yet crucial sorting algorithms. The input array `pk_rank`

to be sorted is of size N.

In case you are not familiar with any of the sorting algorithms mentioned below, we advice you to read about them before moving onto the following sections. The intention of the following examples is ** not **to explain the different algorithms but to explain how you can derive their time and space complexity.

### Bubble Sort ?

The **bubble sort****, **one of the simplest of sorting algorithms repeatedly compares adjacent elements of an array and swaps them if they are out of order. The analogy is drawn from bubbles which rise to the top eventually. As elements of an array are sorted, they gradually **bubble** to their correct position in the array.

**Time Complexity: **Now that we have the algorithm in place, let’s get to analyzing its time and space complexity. We can clearly see from `step 2 and 3`

there is a *nested loop* structure in the algorithm. Also the range of the second for loop is `N — 1 — i`

, which clearly indicates it is dependent on the previous loop.

`if i = 0, second for loop would execute N-1 timesif i = 1, second for loop would execute N-2 timesif i = 2, second for loop would execute N-3 times..if i = N-1, second for loop would execute 0 times`

Now we know the amount of time (iterations) our bubble sort algorithm takes at each step along the way. We mentioned before that there is a nested loop in the algorithm. For each value of the variable in the first loop, we know the amount of time taken in the second loop. All that remains now is to sum these up. Let’s do that.

`S = N-1 + N-2 + N-3 + ... + 3 + 2 + 1~ N * (N+1) / 2 ~ N² + N, ignoring all the coefficients`

If you look at `step 4`

and `step 5`

, these are constant time operations. They don’t really add anything to the time complexity (or space complexity for that matter). That implies, we have **N² + N **iterations and in each iteration, we have constant time operations being performed.

Hence, the runtime complexity of bubble sort algorithm would be **C.(N² + N) **where `C`

is a constant. Asymptotically we can say the worst case time complexity for Bubble Sort is

.**O(N²)**

Is this a good sorting algorithm? We haven’t looked at any other algorithms as such to compare with. However, let’s see how long it will take for this algorithm to sort a billion pokemons (reproduction, overpopulation, you get it ?).

We leave the calculation up to you, but, it will take bubble sort approximately **31,709 years **to sort a billion pokemons (assuming every instruction takes 1 ms to execute). Is Pikachu immortal or something ?

**Space Complexity: **Analyzing the space complexity is comparatively simpler as opposed to the time complexity for this algorithm. The bubble sort algorithm only performs one operation repeatedly. Swapping of numbers. In doing this, it doesn’t make use of any external memory. It just re-arranges the numbers in the original array and hence, the space complexity is constant, or `O(1)`

or even `Θ(1)`

.

### Insertion Sort ???

Do you like playing cards?

Bueno, incluso si no lo hace, debe saber que una buena estrategia inicial en muchos juegos es organizar las cartas en un orden específico, es decir, ** clasificar la baraja de cartas . **La idea de la clasificación por inserción es muy similar a la de organizar la baraja de cartas.

Digamos que tiene algunas cartas ordenadas en orden ascendente. Si te dan otra carta, debes estar `inserted`

en la posición correcta para que las cartas en tu mano aún estén ordenadas. *¿Qué harás?*

Del mismo modo, si se proporcionan más cartas nuevas, repite el mismo proceso para cada nueva carta y mantén las cartas en tu mano ordenadas.

**Insertion sort** works in the same manner. It starts from index `1`

(array ordering starts at `0`

) and treats each element like a new card. Each of the new element can then placed at the correct position in the *already sorted left subarray*.

The important thing to note here is, given a new card (or an element in our case at an index `j`

), all the cards in the hand (or all the elements before that index) are *already sorted*.

Let’s look at a formal algorithm for insertion sort followed by an animation that executes the algorithm on a test input.

**Time Complexity: **From `step 1 and 4`

there is a *nested *`while`

structure within a `for`

loop. The while loop runs `j+1`

times and `j`

is clearly dependent on `i`

. Let’s see how value of `j`

changes with changing values of `i`

.

`if i = 1, then j = 0 hence while loop would execute 1 timesif i = 2, then j = 1 hence while loop would execute 2 timesif i = 3, then j = 2 hence while loop would execute 3 times..if i = N-1, then j = N-2 hence while loop would execute N-1 times`

Now we know the amount of time (iterations) our insertion sort algorithm takes at each step along the way. Total time is:

`S = 1 + 2 + 3 + .... + N-2 + N-1~ N * (N+1) / 2 ~ N² + N, ignoring all the coefficients`

`Step 2 through 7`

are constant time operations. They don’t really add anything to the time complexity (or space complexity for that matter). That implies, we have **N² + N **iterations and in each iteration, we have constant time operations being performed.

Hence, the runtime complexity of the insertion sort algorithm would be **C.(N² + N) **where `C`

is a constant. Asymptotically, we can say the worst case time complexity for Insertion Sort is same as that of bubble sort i.e. **O(N²)****.**

**Space Complexity: **Analyzing the space complexity is comparatively simpler as opposed to the time complexity for this algorithm. The insert sort algorithm only re-arranges the numbers in the original array. In doing this, it doesn’t make use of any external memory at all. Hence, the space complexity is constant, or `O(1)`

or even `Θ(1)`

.

**Nota:** Comparar algoritmos sobre la base de la complejidad asintótica es fácil y rápido. También en un nivel superior es una buena medida. Pero desde los aspectos prácticos, si dos algoritmos tienen la misma complejidad, no significa necesariamente que tengan el mismo rendimiento en escenarios prácticos.

Al calcular la complejidad asintótica de un algoritmo, ignoramos todos los *factores constantes* y los términos de orden inferior.

Insertion sort is much faster than bubble sort when the array is *almost* sorted. For each pass through the array, bubble sort must go till the end of the array and compare the adjacent pairs, insertion sort on the other hand, would bail early if it finds that the array is sorted. Try executing the two algorithms on a sorted array and look at the number of iterations it takes each of them to finish execution.

Thus, whenever you are finding the best algorithm for your application, it needs to be analyzed from a lot of different aspects. Asymptotic analysis definitely helps to weed out slower algorithms, but observation and deeper insights help to find the best suited algorithm for your application.

### Merge Sort ?

So far we’ve analyzed two of the most basic sorting algorithms. These are introductory sorting algorithms but are not the ones generally used in practice due to their high asymptotic complexity.

Let’s move on to a faster, more practical sorting algorithm. The merge sort algorithm deviates from the *nested loop* structured sorting that we have seen in the previous two algorithms and adopts a completely new paradigm that we will be discussing below.

The **Merge Sort** algorithm is based on something known as the *Divide and Conquer* programming paradigm. This programming paradigm is based on a very simple idea and this finds utility in a lot of different algorithms out there including merge sort. Divide and Conquer is divided into three basic steps:

**: Divida un gran problema en subproblemas más pequeños.**

*Dividir*** Conquistar** : resuelve de manera óptima los subproblemas más pequeños

** Combinar :** Finalmente,Combine los resultados de los subproblemas para encontrar la solución al gran problema original.

Veamos una breve descripción general de cómo el algoritmo de ordenación por fusión hace uso del paradigma divide y vencerás.

*Dividir*~ El primer paso en el proceso es*dividir*la matriz dada en dos submatrices más pequeñas de igual tamaño. Esto ayuda ya que ahora tenemos 2 arreglos más pequeños para ordenar, cada uno con la mitad del número original de elementos.*Conquista ~*El siguiente paso es ordenar las matrices más pequeñas. Esta parte se conoce como el paso de*conquista,*ya que estamos resolviendo los subproblemas de manera óptima.*Combine ~*Finally, we are presented with two sorted halves of the original array and we have to combine them optimally such that we get a single sorted array. This is the*combine*step of the paradigm explained above.

But wait. Is this it?

Given an array of 1000 elements if we divide it into 2 equal halves of 500 each, we still have a lot of elements to sort in an array (or sub-array).

Shouldn’t we divide the two halves further into 4 to get even shorter subarrays?

Yes! Indeed we should!

**We recursively divide the array into smaller halves and sort and merge the smaller halves to get the original array back.**

This essentially means we divide e.g. an array of size 1000 into 2 halves of 500 each. Then we further split these two halves into 4 portions of 250 each and so on. Don’t worry if you’re not able to contemplate all of this intuitively in terms of complexity analysis. We will get to that very soon.

Let’s have a look at the algorithm for merge-sort. The algorithm is divided into two functions, one which recursively sorts the two equal halves of a given array and another one which merges the two sorted halves together.

We will first analyze the complexity of the *merge* function and then get to analyzing the *merge_sort* function.

The above function simply takes in two sorted halves of the array and merges them together into a single, sorted half. The two halves are defined using indices. The left half is from `[left, mid]`

and the right half is from `[mid + 1, right]`

.

`step 2-3`

copies the elements over from the original array to a temporary buffer and we use this buffer for merging purposes. The sorted elements are copied back to the original array. Since we iterate over a certain portion of the array, the time complexity for this operation is `O(N)`

considering there are `N`

elements in the array.

`step 5`

is a while loop which iterates over the shorter one of the two subarrays. This while loop and the ones that come after, in `step 13 and step 14`

cover all the elements of the two subarrays. So, their combined time complexity is `O(N)`

.

Esto significa que el paso de fusión es un algoritmo de tiempo lineal.

La complejidad general del tipo de combinación se decide por el número de veces que se llama a la función de combinación.Sigamos adelante y veamos la función *merge_sort* original . Es extremadamente simple.

`step 4`

llama a la `merge_sort`

función en la mitad izquierda de la matriz.

`step 5`

llama a la `merge_sort`

función en la mitad derecha de la matriz.

y `step 6`

finalmente llama a la `merge`

función para combinar las dos mitades.

Uh. ¿Una función que se llama a sí misma? ??

¿Cómo se calcula su complejidad?

Till now we have discussed analysis of loops. Many algorithms, however, like Merge Sort are recursive in nature. When we analyze them, we get a recurrence relation for time complexity. We get running time on an input of size `N`

as a function of `N`

and the running time on inputs of smaller sizes.

Primarily, there are two important ways of analyzing the complexity of a recurrence relation:

- Using a Recursion Tree and
- Using the Master Method.

### Recursion Tree Analysis ?

This is the most intuitive way for analyzing the complexity of recurrence relations. Essentially, we can visualize a recurrence relation in the form of a recursion tree.

The visualization helps to know the amount of work done by the algorithm at each step (read level) along the way and summing up the work done at each level tells us the overall complexity of the algorithm.

Before we look at the recursion tree for the Merge Sort algorithm, let’s first look at the recurrence relation for it.

`T(N) = 2T(N / 2) + O(N)`

Let `T(N)`

represent the amount of work done (or the time taken to) sort an array consisting of `N`

elements. The above relation states that the overall time taken is equal to the time taken to sort the two halves of the array `+`

the time taken to merge the two halves. We have already seen the time taken to merge the two halves before and that is `O(N)`

.

We can write the recurrence relation as follows:

`T(N) = 2T(N / 2) + O(N)T(N / 2) = 2T(N / 4) + O(N / 2)T(N / 4) = 2T(N / 8) + O(N / 4)...`

It’s much easier to visualize this in the form of a tree. Each node in the tree would consist of two branches since we have two different subproblems given a single problem. Let’s look at the recursion tree for merge sort.

Each node in the tree represents a subproblem and the value at each node represents the amount of work spent at each subproblem. The root node represents the original problem.

In our recursion tree, every non-leaf node has 2 children, representing the number of subproblems it is splitting into. We have seen from the algorithm for Merge Sort that at each step of the recursion, the given array is divided into two equal halves.

So, there are two important things we need to figure out in order to analyze the complexity of the merge sort algorithm.

- We need to know the amount of
*work*done at each*level*in the tree and - We need to know the total number of
*levels*in the tree, or, as it is more commonly called, the*height of the tree.*

First, we will calculate the height of our recursion tree. We can see from the recursion tree above that every non-leaf node splits into two nodes. Hence, what we have above is a *complete binary tree*.

Intuitively, we will go on splitting the array until there is a single element left in a subarray, at which point we don’t need any sorting (this is the base case) and we simply return.

At the first level in our binary recursion tree, there is a single subproblem consisting of `N`

elements. The next level in the tree consists of `2`

subproblems (sub-arrays to be sorted) with `N / 2`

elements each.

Right now, we are not really concerned with the *number of subproblems*. We just want to know the size of each subproblem since we can see that **all the subproblems on a particular level of the tree are of the same size.**

`At Level 0 we have subproblem(s) each consisting of N elementsAt Level 1 we have subproblem(s) each consisting of N/2 elementsAt Level 2 we have subproblem(s) each consisting of N/4 elementsAt Level 3 we have subproblem(s) each consisting of N/8 elementsAt Level 4 we have subproblem(s) each consisting of N/16 elements...At Level X we have subproblem(s) each consisting of 1 element.`

The number of elements seem to be reducing in `powers of 2`

. From the pattern above, it seems that:

`N = 2^X X = log_2(N)`

This means, the height of our tree is `log_2(N)`

(log base 2 of N). Now let’s look at the *amount of work done by the algorithm at each step.*

`T(N)`

is defined as the amount of work required to be put in for sorting an array of `N`

elements. We looked at the recurrence relation for this earlier on and it was:

`T(N) = 2T(N / 2) + O(N)`

This implies, the amount of work done at the first level in the tree is `O(N)`

and rest of the work is done at the next level. This is due to the recursion call in the form of `2T(N / 2)`

. At the next level, as we can see from the figure above, the amount of work done is `2 * O(N / 2) = O(N)`

. Similarly, the amount of work done at the third level os `4 * O(N / 4) = O(N)`

.

Surprisingly, the algorithm has to perform the same amount of work on each level and that work amounts to `O(N)`

which is the time consumed by the *merge* procedure. Thus, the number of levels will define the overall time complexity.

As we calculated earlier, the number of levels in our recursion tree are `log(N)`

and hence, the time complexity for Merge Sort is `O(Nlog(N)).`

Yay! We learnt a new methodology for asymptotic analysis in the form of recursion trees. It’s a fun way to build an intuition about the complexity of any recurrence relation. It may not always be feasible to draw out the complete recursion tree, but it definitely helps build an understanding.

### Master Method Analysis ??

We’ve looked at the recursion tree based method for asymptotic analysis of recurrences. However, as mentioned before, it might not be feasible to draw out the recursion tree every time for calculating the complexity.

The merge sort recursion breaks a given problem (array) into two smaller sub-problems (subarrays). What if we get an algorithm where a problem is divided into say, 100 subproblems? We won’t be able to draw out the recursion tree for analysis.

Thus, we need a more direct way for analyzing the complexity of a recurrence relation. We need a method which doesn’t require us to *actually draw* the recursion tree but one which builds on the same concepts as the recursion tree.

This is where the **Master Method **comes into the picture. This method is based on the recursion tree method. There are three different scenarios that are covered under the master method which essentially cover most of the recurrence relations. Before looking at these cases, however, let’s look at the recursion tree for the following general recursion relation:

`T(n) = a T(n / b) + f(n)`

`n`

is the size of the problem.`a`

is the number of subproblems in the recursion.`n / b`

is the size of each subproblem. (Here it is assumed that all subproblems are essentially the same size.)`f(n)`

is the cost of the work done outside the recursive calls, which includes the cost of dividing the problem into smaller subproblems and the cost of merging the solutions to the subproblems.

The two most important things to know for us to understand the master method are the amount of work done by the algorithm at the root and the amount of work done at the leaves.

The work done at the root is simply `f(n)`

. The amount of work done at the leaves is dependent upon the height of the tree.

The height of this tree would be `log_b(n)`

i.e log base `b`

of `n`

. This follows from the recursion tree we saw for merge sort. `b`

in case of merge sort is `2`

. The number of nodes at any level, `l`

are `a^l`

and so, the number of leaf nodes at the last level would be:

`a^{log_b(n)} = n ^ log_b(a) nodes.`

Since the amount of work done on each subproblem at the final level is `Θ(1)`

, the total amount of work done at the leaf nodes is `n ^ log_b(a)`

.

If you focus on the generic recurrence relation above, you will notice that there are two main competing forces at play:

*The Division step*~ the ??(?/?) term is desperately trying to reproduce, multiplying smaller and smaller copies of itself.*The Conquer step*~ the ?(?) term represents merging since it is desperately trying to collapse these mini-portions together.

The two forces are trying to oppose the other one and in doing so, they want to control the total amount of work done by the algorithm and hence the overall time complexity.

Who will win ?

#### Case 1 (Divide Step Wins)

If `f(n) = Θ(n^c)`

such that `c < log_b`

(a), th`en T(n) = Θ(n^log_b`

(a`). f`

(n) is the amount of work done at the root of the tree a`nd n ^ log_b`

(a) is the amount of work done at the leaves.

If the work done at leaves is polynomially more, then leaves are the dominant part, and our result becomes the work done at leaves.

`e.g. T(n) = 8 T(n / 2) + 1000 n^2`

If we fit this recurrence relation in the Master method, we get:

`a = 8, b = 2, and f(n) = O(n^2)Hence, c = 2 and log_b(a) = log_2(8) = 3Clearly, 2 < 3 and this fits in the Case 1 for Master method. This implies, the amount of work done at the leaves of the tree is asymptotically higher than the work done at the root. Hence, the complexity of this recurrence relation is Θ(n^log_2(8)) = Θ(n^3).`

#### Case 2 (Conquer Step Wins)

If `f(n) = Θ(n^c)`

such that `c > log_b`

(a), th`en T(n) = Θ(f(`

n)). If work done at root is asymptotically more, then our final complexity becomes work done at root.

We are not concerned with the amount of work done at the lower levels here, since the largest polynomial term dependent on `n`

is the one that controls the complexity of the algorithm. Hence, the work done on all the lower levels can be safely ignored.

`e.g. T(n) = 2 T(n / 2) + n^2`

If we fit this recurrence relation in the Master method, we get:

`a = 2, b = 2, and f(n) = O(n^2)Hence, c = 2 and log_b(a) = log_2(2) = 1Clearly, 2 > 1 and hence this fits the Case 2 of the Master method where majority of the work is done at the root of the recursion tree and that is why Θ(f(n)) controls the complexity of the algorithm. Thus, the time complexity of this recurrence relation is Θ(n^2).`

#### Case 3 [It’s a tie!]

If `f(n) = Θ(n^c)`

such that `c = log_b(a)`

, then `T(n) = Θ(n^c log(n)).`

The final case is when there’s a tie amongst the work done at the leaves and the work done at the root of the tree.

In this case, both the conquer and the divide steps are equally dominant and hence, the total amount of work done is equal to the the work done at *any level * height of the tree.*

`e.g. T(n) = 2T(n / 2) + O(n)`

Yes! This is the complexity of the Merge Sort algorithm. If we fit the recurrence relation for merge sort in the Master method, we get:

`a = 2, b = 2, and f(n) = O(n^1)Hence, c = 1 = log_2(2)`

`This fits the criterion for the Case 3 described above. The amount of work done is same on all the levels as can be verified from the figure above. Thus, the time complexity is the work done at any level * the total number of levels (or the height of the tree).`

We have analyzed the time complexity of the Merge Sort algorithm using two different ways namely the Recursion Tree and the Master Method. We had to use these different techniques since the merge sort algorithm is a ** recursive** algorithm and the classical asymptotic analysis approaches we had seen earlier for

**were of no use here.**

*loops***Space Complexity: **As for the space complexity, we don’t have to use any complicated techniques and hence, the analysis is much simpler. One main space occupying data structure in the Merge Sort algorithm is the `temp buffer`

array that is used during the `merge`

procedure.

This array is initialized once and the size of this array is `N`

. Another data structure that occupies space is the *recursion stack**. *Essentially, the total number of recursive calls determine the size of the recursion stack. As we’ve seen in the recursion tree representation, **the number of calls made by merge sort is essentially the height of the recursion tree.**

The height of the recursion tree was `log_2(N)`

and hence, the size of the recursion stack will also be `log_2(N)`

at max.

Hence, the total space complexity for merge sort would be `N + log_2(N) = O(N)`

.

### Binary Search ? ? ?

Remember our friend Pikachu and his search for a Pokemon of a specific power. Poor little Pikachu had a 1000 Pokemons at his disposal and he had to find the one Pokemon with a specific power. Yeah, Pikachu is very choosy about his opponents.

His requirements keep on changing day in and day out and he certainly cannot go and check with each and every Pokemon, every time his requirements change i.e. he cannot perform a **Linear Search **through the list of Pokemons to find the one he is looking for.

We mentioned earlier the use of a **Hash Table** to store the Pokemons using their unique power value as the key and the Pokemon itself as the value. This would bring down the search complexity to `O(1)`

i.e. constant time.

However, this makes use of additional space which raises the space complexity of the search operation to `O(N)`

considering there are `N`

Pokemons available. `N`

in this case would be `1000`

. What if Pikachu didn’t have all this extra space available and he still wanted to speed up the search process?

Yes! Certainly Pikachu can make use of his profound knowledge about **sorting algorithms **to come up with a search strategy which would be faster than the slow Linear search.

Pikachu decided to ask his good friend Deoxys for help. Deoxys, being the fastest Pokemon out there, helps Pikachu ** sort **the list of Pokemons according to their power.

Instead of relying on the traditional sorting algorithms, Deoxys makes use of the **Quick Sort**algorithm (of course he does!) for sorting the Pokemons.

In doing so, he doesn’t make use of any additional space and the time taken for sorting the `N`

Pokemons is the same as that of the `Merge Sort`

algorithm. So, Pikachu is happy with his friend helping him out at the time of need.

Pikachu, being extremely smart, comes up with a search strategy which makes use of the sorted nature of the list of Pokemons. This new strategy /algorithm is known as the **Binary Search**algorithm. (**Note**: Sorting is a precondition for running binary search, once the list is sorted Pikachu can run binary search as many times as he wants on this sorted list).

Let’s have a look at the code for this algorithm and then analyze its complexity.

Clearly, the algorithm is recursive in nature. Let’s see if we can use our newly learnt tricks to analyze the time complexity for the binary search algorithm. The two variables `l`

and `r`

essentially define the portion of the array in which we have to search for the given element, `x`

.

If we look at the algorithm, all it’s really doing is dividing the search portion of the input array into half. Other than making a recursive call based on a certain condition, it doesn’t really do anything. So, let’s quickly look at the recurrence relation for the binary search algorithm.

`T(n) = T(n / 2) + O(1)`

That seems like a pretty simple recurrence relation to analyze. First let’s try and analyze the recursion tree and draw the complexity from there and then we will look at the Master theorem and see which of the three cases fits this recursion.

Whoa! This binary search algorithm is super fast. It’s much faster than linear search. What this implies for our cute little friend Pikachu is that for 1000 Pokemons, he would simply have to go and “ask” **10** of them at max to find the one special pokemon he is looking for (how? ?).

Now let’s see how the more “formulaic” way of approach recursive complexity analysis i.e. the Master method help us in this case. The generic master method recursive relation is

`T(n) = a T(n / b) + f(n)`

and for our binary search algorithm we have

`T(n) = T(n / 2) + O(1)f(n) = O(n^0), hence c = 0a = 1b = 2c = 0`

There are 3 different cases for the master theorem and `c ? log_b(a)`

decides which of the three cases get’s used for a particular analysis. In our case, `0 < log_2`

(1) i.`e. 0 `

= 0. This implies that our binary search algorithm fits t**he case**-3 of the master theorem, therefo`re T(n) = Θ(n^0 log(n)) = Θ(log`

(n)

### How to choose the best algorithm? ?

In this article we introduced the idea of complexity analysis which is an important part of algorithm design and development. We saw why analyzing an algorithm’s complexity is important and how it directly affects our scalability decisions. We even saw some great techniques for analyzing this complexity efficiently and correctly so as to make informed decisions in a timely manner. The question arises, however,

**Given all that I know about the time and space complexities of two algorithms, how do I choose which one to finally go with? Is there a golden rule?**

The answer to this question, unfortunately, is **No!**

There’s no golden rule to help you decide which algorithm to go with. It totally depends on a lot of external factors. Let’s try and look at a few of these scenarios that you might find yourself in and also look at the kind of decisions you would want to make.

#### No constraint on the space!

Well, if you have two algorithms A and B and you want to decide which one to use, apart from the time complexity, the space complexity also becomes an important factor.

However, given that space is not an issue that you are concerned with, it’s best to go with the algorithm that has the capability to reduce the time complexity even further given more space.

For example, Counting Sort is a linear time sorting algorithm but it’s heavily dependent upon the amount of space available. Precisely, the *range* of numbers that it can deal with depends on the amount of space available. Given unlimited space, you’re better off using the counting sort algorithm for sorting a huge range of numbers.

#### Sub-second latency requirement and limited space available

If you find yourself in such a scenario, then it becomes really important to deeply understand the performance of the algorithm on a lot of varying inputs especially the kind of inputs you expect the algorithm to work with in your application.

For example, we have two sorting algorithms: Bubble sort and Insertion sort, and you want to decide amongst them which one to use for sorting a list of users based on their age. You analyzed the kind of input expected and you found the input array to be ** almost sorted**. In such a scenario, it’s best to use Insertion sort over Bubble sort due to its inherent ability to deal amazingly well with almost sorted inputs.

#### Wait, why would anyone use Bubble or Insertion sort in real world scenarios?

If you think that these algorithms are just for educational purposes and are not used in any real world scenarios, you’re not alone! However, this couldn’t be further away from truth. I’m sure you’ve all used the `sort()`

functionality in Python sometime in your career.

Well, if you’ve used it and marveled at its performance, you’ve used a hybrid algorithm based on Insertion Sort and Merge Sort called the Tim Sort algorithm. To read more about it, head over here:

**Timsort — the fastest sorting algorithm you’ve never heard of**

*Timsort: A very fast , O(n log n), stable sorting algorithm built for the real world — not constructed in academia…*skerritt.blog

It’s true that insertion sort might not be useful for very large inputs as we’ve al seen from its polynomial time complexity. However, it’s inherent ability to quickly sort *almost* sorted range of numbers is what makes it so special and that’s precisely the reason it’s used in the Timsort algorithm.

In short, you won’t ever have a clear black and white division between the algorithms you are struggling to choose from. You have to analyze all the properties of the algorithms, including their time and space complexity. You have to consider the size of inputs you are expecting your algorithm to work with and any other constraints that might exist. Considering all these factors, you have to make an informed decision!

Si se divirtió entendiendo las complejidades del análisis de complejidad y también jugando con nuestro amigo Pikachu, recuerde destruir ese botón Me gusta y difundir un poco de amor.*❣️*Si desea más problemas de programación con análisis de complejidad detallado, ¡diríjase a nuestra cocina!

*?*Analizar un algoritmo es una parte importante del conjunto de habilidades de cualquier desarrollador y si cree que hay otros que podrían beneficiarse de este artículo, ¡compártelo tanto como sea posible!